Voice Systems – Time Change Instructions

Innovation

From the voice mail computer:

1. Press [F9].

2. Follow the prompts to update the time and date.

 

Mitel Super Switch 200

From Console:

Set Time
* 5 HHMM

Set Date
* 15 MMDDYY

 

Partner ACS

Can only be done at extension 10 or 11.

<FEAT> 00 <Left Intercom> <Left Intercom> # 103

<Enter the new Time> (Enter time in 24 hour format. Example 2:15 pm would be 14:15)

<FEAT> 00

PCS Digital

Phone Time Change
1. Access Database Programming (FEAT #* 000000)
2. Press [next] until display reads 4. Resource and press [show].
3. Go to SYSTEM TIME and press [show]
4. Go to Hour and press [change] and dial the hour in 24 hour format and press [save].
5. Go to Minute and press [change] dial the current minute. Press [save].

Voice Mail Time Change

1. Press MSG
2. When Voice Mail Answers dial ##00
3. Enter Admin Password 9#56
4. Choose option 4 and follow prompts to change date and time.

 

Samsung DCS & SVMI

From the attendant or programming station:

1. With your handset on-hook, press the [TRSF] key and then dial 200.
The display shows “ENABLE CUS. PROG. PASSCODE”.

2. Dial the four digit passcode (1234).
The display shows “ENABLE CUS. PROG. – DISABLE”.

3. Dial 1 to enable.
The display shows “ENABLE CUS. PROG. – ENABLE”.

4. Press the [TRSF] key.

5. Press the [TRSF] key again and dial 505.

6. Enter the new time and date using the following format:
W MM DD YY HH MM

Day of the week [W]: Enter 0 for Sunday and 6 for Saturday
Month [MM]: Enter 01 for January and 12 for December
Day or the month [DD]: Enter a number in the range of 01-31
Year [YY]: Enter the last two digits of the year
Hours [HH]: Use 24 hour format
Enter a number in the range of 00-24
Minutes [MM]: Enter a number in the range of 00-59

7. Verify the time and date and reenter if necessary.

8. Press the [TRSF] key to store and exit programming.
**If you also have an SVMI-4 or SVMI-8 voice mail system, the voice mail will match the phone system time and date.

 

Samsung iDCS & SVMI VM

From the attendant or programming station:

1. With your handset on-hook, press the [TRSF] key and then dial 200.
The display shows “ENABLE CUS. PROG. PASSCODE”.

2. Dial the four digit passcode (1234).
The display shows “ENABLE CUS. PROG. – DISABLE”.

3. Dial 1 to enable.
The display shows “ENABLE CUS. PROG. – ENABLE”.

4. Press the [TRSF] key.

5. Press the [TRSF] key again and dial 505.

6. Enter the new time and date using the following format:
W MM DD YY HH MM

Day of the week [W]: Enter 0 for Sunday and 6 for Saturday
Month [MM]: Enter 01 for January and 12 for December
Day or the month [DD]: Enter a number in the range of 01-31
Year [YY]: Enter the last two digits of the year
Hours [HH]: Use 24 hour format
Enter a number in the range of 00-24
Minutes [MM]: Enter a number in the range of 00-59

7. Verify the time and date and reenter if necessary.

8. Press the [TRSF] key to store and exit programming.
**If you also have an SVMI-4 or SVMI-8 voice mail system, the voice mail will match the phone system time and date.

 

Samsung iDCS

From the attendant or programming station:

1. With your handset on-hook, press the [TRSF] key and then dial 200.
The display shows “ENABLE CUS. PROG. PASSCODE”.

2. Dial the four digit passcode (either 1234 or 4321).
The display shows “ENABLE CUS. PROG. – DISABLE”.

3. Dial 1 to enable.
The display shows “ENABLE CUS. PROG. – ENABLE”.

4. Press the [TRSF] key.

5. Press the [TRSF] key again and dial 505.

6. Enter the new time and date using the following format:
W MM DD YY HH MM

Day of the week [W]: Enter 0 for Sunday and 6 for Saturday
Month [MM]: Enter 01 for January and 12 for December
Day or the month [DD]: Enter a number in the range of 01-31
Year [YY]: Enter the last two digits of the year
Hours [HH]: Use 24 hour format
Enter a number in the range of 00-24
Minutes [MM]: Enter a number in the range of 00-59

7. Verify the time and date and reenter if necessary.

8. Press the [TRSF] key to store and exit programming.
**If you also have an SVMI-4 or SVMI-8 voice mail system, the voice mail will match the phone system time and date.

 

ShoreTel

Please view the ShoreTel training pdf for step by step instructions. on changing the time settings.

 

Tadiran Phone System Gel

**TIME**

? Dial TIME DATE SET access code [188].
? Dial in the time [4 digits required / 12 hour time clock].
? Dial 2 for AM or 7 for PM.
? Dial activation code [#11].
? Hear confirmation tone.
**DATE**

? Dial TIME DATE SET access code [188].
? Press the arrow up key.
? Enter the date: month, day, year [2 digits].
? Dial activation code [#11].
? Hear activation tone.

 

Tadiran Phone System

**TIME**

? Dial TIME DATE SET access code [# 188].
? Dial in the time [4 digits required / 12 hour time clock].
? Dial 2 for AM or 7 for PM.
? Dial activation code [#11].
? Hear confirmation tone.
**DATE**

? Dial TIME DATE SET access code [# 188].
? Press the arrow up key.
? Enter the date: month, day, year [2 digits].
? Dial activation code [#11].
? Hear activation tone.

 

Telrad Phone System & Voicemail (older)

From the pre-programmed time change extension (typically the receptionist):

1. Press the [FEAT] key.

2. Press the [PROG] key.

3. Press the [TIME] key.

4. Dial the time and date in the following sequence:

HH MM (24 hour format) DD MM YY
(Hour Minute Day Month Year)

You must enter both the time and date even though you only need to update the time.

5. Press the [SAVE] key.

**TELRAD VOICE MAIL**

From the voice mail computer located in the equipment room:

1. You may need to turn on the monitor. Press any key to remove the screen saver.

2. Press [F10] which will make the voice mail inoperable to all callers and users.

3. At the {C:\IVM>} prompt, type “CD..”.

4. At the {C:\>} prompt, type “TIME” and press the [ENTER] key.

5. Type the new time in 24 hour format with a colon separating the hour and minutes. Press the [ENTER] key.

6. At the {C:\>} prompt, type “CD IVM”.

7. At the {C:\IVM>} prompt, type “VM”. This should return the voice mail to normal operation. You should see the main menu screen.

8. After resetting, test the voice mail system by pressing any [IVM] key.

 

Telrad Phone System (newer)

From the pre-programmed time change extension (typically the receptionist):

1. Press the [FEAT] key.

2. Press the [PROG] key.

3. Press the [TIME] key.

4. Dial the time and date in the following sequence:

HH MM (24 hour format) DD MM YY
(Hour Minute Day Month Year)

You must enter both the time and date even though you only need to update the time.

5. Press the [SAVE] key.
**If you also have a voice mail system, the voice mail should synchronize to have the correct time from the phone system. If not, please contact our office at 843-744-0150, extension 250 for additional instructions.

 

Telrad Phone System (without Time Key)

1. Press the [FEAT] key.
2. Press the [PROG] key.
3. Press [FEAT] key again.
4. Dial 82
5. Then enter the HH MM DD MM YY.
6. Then press the [SPKR] key.

Note: These instructions are for a set that tech set up as a Time Change Station but the set does not have a [TIME] key.

 

If you have a problem changing the time for any of your modules, give us a call at 843-744-0150 ext 250.