Samsung - Time Change Instructions

DCS & SVMI

From the attendant or programming station:

  1. With your handset on-hook, press the [TRSF] key and then dial 200.
    The display shows "ENABLE CUS. PROG. PASSCODE".
  2. Dial the four digit passcode (1234).
    The display shows "ENABLE CUS. PROG. – DISABLE".
  3. Dial 1 to enable.
    The display shows "ENABLE CUS. PROG. – ENABLE".
  4. Press the [TRSF] key.
  5. Press the [TRSF] key again and dial 505.
  6. Enter the new time and date using the following format:
    W MM DD YY HH MM

    Day of the week [W]: Enter 0 for Sunday and 6 for Saturday
    Month [MM]: Enter 01 for January and 12 for December
    Day or the month [DD]: Enter a number in the range of 01-31
    Year [YY]: Enter the last two digits of the year
    Hours [HH]: Use 24 hour format
    Enter a number in the range of 00-24
    Minutes [MM]: Enter a number in the range of 00-59

  7. Verify the time and date and reenter if necessary.
  8. Press the [TRSF] key to store and exit programming.
    **If you also have an SVMI-4 or SVMI-8 voice mail system, the voice mail will match the phone system time and date.

iDCS & SVMI VM

From the attendant or programming station:

  1. With your handset on-hook, press the [TRSF] key and then dial 200.
    The display shows "ENABLE CUS. PROG. PASSCODE".
  2. Dial the four digit passcode (1234). The display shows "ENABLE CUS. PROG. – DISABLE".
  3. Dial 1 to enable. The display shows "ENABLE CUS. PROG. – ENABLE".
  4. Press the [TRSF] key.
  5. Press the [TRSF] key again and dial 505.
  6. Enter the new time and date using the following format:
    W MM DD YY HH MM

    Day of the week [W]: Enter 0 for Sunday and 6 for Saturday
    Month [MM]: Enter 01 for January and 12 for December
    Day or the month [DD]: Enter a number in the range of 01-31
    Year [YY]: Enter the last two digits of the year
    Hours [HH]: Use 24 hour format
    Enter a number in the range of 00-24
    Minutes [MM]: Enter a number in the range of 00-59

  7. Verify the time and date and reenter if necessary.
  8. Press the [TRSF] key to store and exit programming.

**If you also have an SVMI-4 or SVMI-8 voice mail system, the voice mail will match the phone system time and date.

iDCS

From the attendant or programming station:

  1. With your handset on-hook, press the [TRSF] key and then dial 200.
    The display shows "ENABLE CUS. PROG. PASSCODE".
  2. Dial the four digit passcode (either 1234 or 4321).
    The display shows "ENABLE CUS. PROG. – DISABLE".
  3. Dial 1 to enable.
    The display shows "ENABLE CUS. PROG. – ENABLE".
  4. Press the [TRSF] key.
  5. Press the [TRSF] key again and dial 505.
  6. Enter the new time and date using the following format:
    W MM DD YY HH MM

    Day of the week [W]: Enter 0 for Sunday and 6 for Saturday
    Month [MM]: Enter 01 for January and 12 for December
    Day or the month [DD]: Enter a number in the range of 01-31
    Year [YY]: Enter the last two digits of the year
    Hours [HH]: Use 24 hour format
    Enter a number in the range of 00-24
    Minutes [MM]: Enter a number in the range of 00-59

  7. Verify the time and date and reenter if necessary.
  8. Press the [TRSF] key to store and exit programming.

**If you also have an SVMI-4 or SVMI-8 voice mail system, the voice mail will match the phone system time and date.