Telrad - Time Change Instructions

Telrad Phone System & Voicemail (older)

From the pre-programmed time change extension (typically the receptionist):

  1. Press the [FEAT] key.
  2. Press the [PROG] key.
  3. Press the [TIME] key.
  4. Dial the time and date in the following sequence:

    HH MM (24 hour format) DD MM YY
    (Hour Minute Day Month Year)

    You must enter both the time and date even though you only need to update the time.

  5. Press the [SAVE] key.

**TELRAD VOICE MAIL**

From the voice mail computer located in the equipment room:

  1. You may need to turn on the monitor. Press any key to remove the screen saver.
  2. Press [F10] which will make the voice mail inoperable to all callers and users.
  3. At the {C:\IVM>} prompt, type “CD..”.
  4. At the {C:\>} prompt, type “TIME” and press the [ENTER] key.
  5. Type the new time in 24 hour format with a colon separating the hour and minutes. Press the [ENTER] key.
  6. At the {C:\>} prompt, type “CD IVM”.
  7. At the {C:\IVM>} prompt, type “VM”. This should return the voice mail to normal operation. You should see the main menu screen.
  8. After resetting, test the voice mail system by pressing any [IVM] key.

Telrad Phone System (newer)

From the pre-programmed time change extension (typically the receptionist):

  1. Press the [FEAT] key.
  2. Press the [PROG] key.
  3. Press the [TIME] key.
  4. Dial the time and date in the following sequence:

    HH MM (24 hour format) DD MM YY
    (Hour Minute Day Month Year)

    You must enter both the time and date even though you only need to update the time.

  5. Press the [SAVE] key.

**If you also have a voice mail system, the voice mail should synchronize to have the correct time from the phone system. If not, please contact our office at 843-744-0150, extension 250 for additional instructions.

Telrad Phone System (without Time Key)

  1. Press the [FEAT] key.
  2. Press the [PROG] key.
  3. Press [FEAT] key again.
  4. Dial 82
  5. Then enter the HH MM DD MM YY.
  6. Then press the [SPKR] key.

Note: These instructions are for a set that tech set up as a Time Change Station but the set does not have a [TIME] key.